Wall Mounting (Kx-Tda50) - Panasonic KX-TDA50 Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.8

Wall Mounting (KX-TDA50)

Mounting on Wooden Wall
1.
Place the reference for wall mounting (on the last page of this manual) on the wall to mark the three
screw positions.
130 mm (5-1/8 in)
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3.
Hook the main unit on the screw heads.
Notes
• Do not block the openings of the cabinet. Leave at least 20 cm (8 in) of space above and 10 cm (4
in) to the sides of the Hybrid IP-PBX for ventilation.
• Make sure that the wall behind the cabinet is flat and free of obstacles, so that the openings on the
back of the cabinet will not be blocked.
• Be careful not to drop the cabinet.
50 Installation Manual
250 mm
(9-13/16 in)