Panasonic KX-TDA50 Installation Manual page 105

Using the KX-TD7690
SEL
Select S1
"SYSTEM LOCK".
SEL System Lock Password
ENABLE
S1
DISABLE
ENTR
C.Tone
S1
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set to the Hybrid
IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to the Hybrid IP-PBX into the
PS. By doing so, the PS will only be registered to the Hybrid IP-PBX with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS. Therefore, the
PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid IP-PBX.
Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN near the PS, the PS
will not be linked to a different Hybrid IP-PBX during normal operation after registration.
Setting the PIN for Hybrid IP-PBX
[692]
ENTER
Setting the PIN for PS
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
SEL
Select
S1
"CHANGE PIN"
CHNG
Choose
S1
"Enable/Disable".
ENTR
4 digits S1
PIN for PS Registration
1 to 4 digits
1234
PIN for PS Registration
1 to 4 digits
1234
PIN for PS Registration
1 to 4 digits
1234
2.7 Connection of 2.4 GHz Portable Stations
System Lock Password
4 digits
END
ENTER
C.Tone
ENTR
C.Tone
S1
Installation Manual 105