Download Print this page

Changing The Light Bulb - AEG DD8691 Operating And Installation Manual

Hide thumbs

Advertisement

Warning
Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

Disconnect the cooker hood from the main supply.
Remove the lamp cover, use a screw driver as a lever. Fig. 6.
Replace the old bulb with a new one of the same type.
Remount the lamp cover.
If the light does not come on, make sure the bulb has been inserted
in correctly before contacting the technical assistance service.
Fig. 6
69

Advertisement

loading

This manual is also suitable for:

Dd 8691