Changing The Light Bulb - AEG DK 9160-9190 Operating And Installation Instructions

Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the mains supply.
DK 9160 - DK 9190
DK 9090 - DK 9060
• Remove the lamp cover. Fig. 5.
• Replace the old bulb with a new
one of the same type.
• Remount the lamp cover.
DK 9360 - DK9390 - DK 9660 - HC 5690
DK 9690 - DK 9960 - DK9990 - HC 3360
• Press (1) the lamp cover (2) and
open it. Fig. 6.
• Replace the old bulb with a new
one of the same type (3).
• Close the lamp cover.
• If the light does not come on,
make sure the bulb has been
inserted in correctly before
contacting your local Service
Force Centre.
1
2
Fig. 5
3
1
2
Fig. 6
79