Warning; Changing The Light Bulb; Cleaning The Hood - AEG DD 8415 User Manual

Warning

• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or failure
to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from
the mains supply.
Prior to touching the light bulbs
ensure they are cooled down.
• Using a flat head screwdriver or
equivalent tool, carefully pry loose the
light cover. Fig. 5
• Remove the damaged light and replace
with a new one of the same rated value
and type.
• Reinstall the light cover. (it will snap
shut).
• If the light does not come on, make
sure the bulb has been inserted in
correctly before contacting your local Service Force Centre.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a solution of
water and mild washing up liquid.
• Never use corrosive, abrasive or flammable cleaning products or
products containing bleach.
• Never insert pointed objects in the motor's protective grid.
• Only ever clean the switch panel and filter grill using a damp cloth and
mild washing up liquid.
• Clean all the plastic parts with a soft cloth soaked in warm water and
neutral soap.
• It is extremely important to clean the unit and change the filters at the
recommended intervals. Failure to do so will cause grease deposits to
build up that could constitute a fire hazard.
Fig. 5
51