Changing The Light Bulb; Special Accessories - AEG DM 8700 Operating And Installation Instructions

Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the mains supply.
• Remove the lamp cover carefully, use a screw driver as a
lever. Fig. 6.
• Replace the old bulb with a new one of the same type.
• Refit the lamp cover.
• If the light does not come on, make sure the bulb has been inserted
in correctly before contacting your local Service Force Centre.

Special accessories

Vapour screen
Remote control RM 8700 (only for model DM 8700 - DD 8770)
Charcoal filter Type 20
76
Fig. 6
see page 84
942 120 658