Changing The Light Bulb - AEG 740 D Operating And Installation Instructions

Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the unit from the mains power supply.
• Pull out the drawer.
• Open the lamp cover support.
• Replace the old light bulb with a new light bulb of the same kind.
• Replace the lamp cover support.
• If the light does not come on, make sure the bulb has been screwed
in correctly before contacting the technical assistance service.
Fig. 6
41