Changing The Light Bulb - AEG DD 8696 User Manual

Warning
• Failure to observe the instructions on cleaning the unit and changing
the filters will cause a fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.

Changing the light bulb

• Disconnect the cooker hood from the mains
supply.
• Prior to touching the light bulbs ensure they
are cooled down.
• Remove the lamp, use a screw driver as a
lever. Fig. 7.
• Replace the old bulb with a new one of the
same type.
• If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting your local Service Force Centre.
Fig. 7
61