Changing The Light Bulb.53 - AEG HL 7275 Operating And Installation Instructions

/j\ Warning
Failure to observe the instructions on cleaning the unit and
changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
The manufacturer declines all responsibility for any damage to the
motor or any fire damage linked to inappropriate maintenance or
failure to observe the above safety recommendations.
Changing the light bulb
• Disconnect the cooker hood from the mains supply.
• Remove the frame pushing the two side release keys.
• Replace the old bulb with a new one of the same type.
• Refit the frame (snap into place).
• If the light does not come on, make sure the bulb has been inserted
in correctly before contacting your local Service Force Centre.