Installation - Electrolux EDH97950W User Manual

4 installation electrolux

Installation

• This appliance is heavy. Care should be
taken when moving it.
• When unpacking the appliance, check that
it is not damaged. If in doubt, do not use it
and contact the Customer Care Centre.
• All packing and transit bolts must be
removed before use. Serious damage can
occur to the product and to property if this
is not adhered to. See relevant section in
the user manual.
• The final part of a tumble dryer cycle occurs
without heat (cool down cycle) so that
the items are left at a temperature which
ensures they will not be damaged.
• Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
• Care must be taken to ensure that the
appliance does not stand on the electrical
supply cable.
• If the machine is situated on a carpeted
floor, please adjust the feet in order to allow
air to circulate freely.
EMAN_Energy Star_0409.indd 4
Transporting the appliance
Only tip the appliance on its left side to
transport (see illustration), if it cannot be
transported in an upright position.
If the appliance was not transported in an
upright position, leave it to stand for 12 hours
before connecting it to the electricity supply and
using it for the first time, so that the oil can
flow back to the compressor. Otherwise the
compressor could be damaged.
Appliance positioning
• It is recommended that, for your
convenience, the machine is positioned
close to your washing machine.
• The tumble dryer must be installed in a
clean place, where dirt does not build up.
• Air must be able to circulate freely all round
the appliance. Do not obstruct the front
ventilation grille or the air intake grilles at the
back of the machine.
• To keep vibration and noise to a minimum
when the dryer is in use, it should be placed
on a firm, level surface.
12/5/09 11:46:26 AM