Electrolux EDH97950W User Manual page 18

18 care and cleaning electrolux
3. Clean the inside of the door, the lint filter
chamber and the rubber seals of lint.
4. Remove lint from the lint filter on the floor of
the base with a damp hand.
5. To clean the lint filter:
– Remove the filter from the filter housing by
pressing the pressure points on the sides
and pulling the filter frame up and out of
the housing.
1
1
6. Remove lint from the lint filter with a damp
hand. If necessary, clean the filter under
running water using a brush.
EMAN_Energy Star_0409.indd 18
2
2
1
1
7. Insert the lint filter into the filter housing.
8. Clean filter every 5 loads, remove the fluff
from the heat exchanger using the sponge
supplied. When doing this, please use
rubber gloves.
Condenser fins may be sharp, so ensure you
only use the sponge supplied. In addition, be
careful not to apply too much pressure, ensure
you do not cause the condenser fins to bend.
The lint can be removed more easily if it is first
dampened e.g. with a laundry dampener. It is
best to use a vacuum cleaner for this purpose.
Do not use any sharp objects in this area.
9. Re-insert filter housing along with filter in
appliance base. If the lint filter is not inserted
in the filter housing, the filter housing cannot
be slid into the appliance base.
10. Close door in plinth.
12/5/09 11:46:34 AM