Electrolux EDH97950W User Manual page 14

14 daily use electrolux
Child lock
The child lock can be set to prevent a program
being accidentally started or a program in
operation being accidentally changed. The child
lock function locks all buttons and the program
selector. The child lock can be activated or
deactivated by holding down the Buzzer and
Time buttons simultaneously for 5 seconds.
If the child lock is set:
– before program is started, the appliance
cannot be used
– after program is started, program
in operation cannot be changed
The icon appears in the display to indicate
that the child safety device is activated.
The child safety device is not deactivated once
the program comes to an end. If you want to
set a new program, you must first deactivate
the child lock.
Starting the program
Press the Start/Pause button.
The program starts.
The program progress is shown by elapsing
dry time and animated icon
EMAN_Energy Star_0409.indd 14
Changing program
To change a program which has been selected
by mistake once the program has started, first
turn the program selector to
off and then reset the program.
The program can no longer be changed directly
once the program has started. If nevertheless
there is an attempt to change the program on
the program knob, the program progress display
and the maintenance indicators flash. If an
option button (excluding the Buzzer button) is
pressed,
program is not however affected by this (laundry
protection).
Putting in extra items or taking items out
before end of program
1. Open loading door.
Laundry and drum can become hot.
Risk of burns!
2. Load or remove laundry items.
3. Close loading door securely. Lock must
audibly lock.
4. Press the Start/Pause button to continue
the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, the display
shows the anticrease icon and flashing
filter and
has been pressed, an acoustic signal sounds
on LCD.
intermittently for about one minute.
The drying cycles (except from the Wool
program) are automatically followed by an
anticrease phase which lasts around 30
minutes. The drum rotates at intervals during
this phase. This keeps the laundry loose and
appears on the display. The drying
as well as warning lamps:
full tank. If the Buzzer button
12/5/09 11:46:30 AM