Electrolux EDH97950W User Manual page 13

Dryness
This function improves the dryness of the
laundry. Laundry becomes drier as you move
from to .
1. Choose the drying program.
2. Press the Dryness button repeatedly until
the desired dryness level (
shown in the display.
When humidity adjustment is not foreseen
on the related program, the following icon
is shown on the display.
When the Dryness function is not available
for a program the Auto icon,
be displayed.
Long anticrease
This function prolongs the anticrease phase to
90 mins in total. The drum rotates in intervals
during this phase. The laundry therefore remains
relaxed and free of creases.
To activate it:
1. Choose the drying program.
2. Press the Long anticrease button - the
display shows the icon:
If this additional function is selected, the anticrease
phase at the end of the drying cycle is lengthened
by 60 minutes. The laundry can be removed at any
time during the anticrease phase.
To deselect the function press the Long
anticrease button again. The icon above is off.
Buzzer
The appliance is supplied with the Buzzer
function deactivated.
When activated, the buzzer sounds:
– At the end of the cycle
– When the anticrease phase starts or ends
– When the cycle is interrupted
To activate it:
1. Choose the drying program.
2. Press the Buzzer button – the display
shows the icon:
To permanently activate or deactivate buzzer
see the chapter Machine settings.
EMAN_Energy Star_0409.indd 13
Time
Use the Time button to select the
duration after setting the Time program. You
can select a program duration from 20 min. to 3
hours in 10-minute increments.
1. Turn the program selector to the Time
program.
2. Press the Time button repeatedly until the
) is
desired program duration is shown in the
display, e.g.
minutes.
If the program duration is not selected, the
duration is automatically set to 10 mins.
, will
Delay
With the Delay button, you can delay the start
of a program by between 30 minutes and a
maximum of 20 hours.
1. Select the program and additional functions.
2. Press the Delay button as many times as
necessary until the required time of the
delay appears on the display,
e.g.
in 12 hours.
If the display is showing
the button again, the time delay will be cancelled.
The display will show
the selected program.
3. To activate the delay timer, press the
Start/Pause button. The amount of time
remaining until the program is set to start is
continuously displayed (e.g. 15h, 14h, 13h,
... 30' etc).
electrolux daily use 13
program
for a program of 20
if the program is to be started
and you press
and then the duration of
12/5/09 11:46:29 AM