Replacing The Light - Electrolux EDH97950W User Manual

20 replacing the light electrolux

Replacing the light

Replacing the drum light
Only use a special bulb which is designed
specially for dryers. The special bulb can be
obtained from your local Customer Care Centre.
Important! When the appliance is switched on,
the interior lighting switches itself off after
4 minutes when the door is open.
Do not use standard bulbs! These develop too
much heat and may damage the machine!
Before replacing the bulb, disconnect the
mains plug; with a permanent connection: fully
unscrew or deactivate the fuse.
1. Unscrew the cover above the bulb (this
can be found directly behind the loading
aperture, at the top; refer to "Product
description" chapter.)
2. Replace the defective bulb.
3. Screw cover back down. Check the correct
positioning of o-ring gasket before screwing
back the door light cover. Do not operate
the dryer if the o-ring is missing.
For safety reasons, the cover must be screwed
down tightly. If this is not done, the dryer must
not be operated.
EMAN_Energy Star_0409.indd 20 12/5/09 11:46:34 AM