3Com V7350 User Manual page 29

The Email Address field allows you to assign a more meaningful
username. In Figure
is now peter_user1@MRO4C.widget.com. This is useful because IP
Messaging uses the value configured in the Email Address field when
constructing the From: field for e-mail retrieved by an e-mail client.
Note that an e-mail address entered in the Email Address field to
identify a mailbox must be unique on that IP Messaging server. That is,
two mailboxes on the same IP Messaging server cannot share an e-mail
address.
4 If required, enter an operator extension number to be associated with
your mailbox.
5 From the drop-down list, select the order in which New, Saved, and
E-mail messages are stored in your mailbox. The options are First In First
Out (FIFO) or Last In First Out (LIFO).
6 From the drop-down list,
commands send a message from your mailbox
Figure 5 Message Send Order
7 Set your mailbox Auto Login feature to ON (so that you do not have to
enter your password) or to OFF (so that you must enter your password).
8 Set the FMFM (Find Me Follow Me) Call Intercept option to ON or OFF.
When this option is ON, IP Messaging screens callers for caller
identification; this prevents calls from unknown callers.
9 Set the Prompt for your Mailbox Number to ON or OFF.
10 The Virtual Calling Card is a service that allows you to make outgoing
calls from your mailbox. The Time Left field display the remaining virtual
calling card minutes (enabled Maximum Time minus used minutes).This
feature is configured by your administrator.
11 To save your settings, click Save.
4, the default address (1000@MRO4C.widget.com)
(Figure 5) select the order in which TUI
Using the Web Interface 29