Loading Paper In Trays 1 And 2 - Xerox 4110 Getting Started

3. L o ad i ng Pa p er

Loading paper in Trays 1 and 2

3- 2
Use the following procedure for loading paper in trays 1 and 2.
NOTE: When the machine runs out of paper during a copy or print
job, the UI displays a message. Follow the instructions on the UI
for adding paper to the appropriate tray or trays. The copy or print
job automatically resumes once paper is added.
1. Slowly pull out the tray until it stops.
2. Load and align the edge of the paper against the left edge of
the tray with the side to be copied or printed on facing down.
KEY POINT: Do not load paper above the MAX line.
3. Gently push the tray in until it stops.
X e r o x 4 59 0 /4 11 0 Co p ie r / Pr in t er G et ti n g Sta r te d