Xerox 4110 Getting Started page 9

No. Component
1 DADF
2 Document cover
3 User Interface
4 Document glass
5 Power switch
6 Front cover
7 Left Cover
8 Tray 1, 2, 3, 4
9 Locking casters
10 Bottom left cover
11 Front cover for the
optional Trays 6
and 7
12a Tray 6, 7 (optional
HCF)
12b Tray 6 (optional
OHCF)*
13 Tray 5 (Bypass)
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r G e t ti n g Sta r te d
Duplex Automatic Document Feeder
Holds a document in place on the document glass.
The User Interface (UI) consists of the Control Panel and the Touch Screen.
Refer to "User Interface (UI)" on page 1-12.
Place a document here in order to copy it.
Switches on/off the machine power.
Open this cover to clear paper jams and to replace the waste toner bottles.
Open this cover to replace the toner cartridge.
Contains the media used for copy or print output.
Locks the wheels of the machine. Lock these casters after moving the
machine to its installation site.
Open this cover to remove paper jams.
Open this cover to access the bottom left cover.This cover and the trays 6 and
7 are part of the optional High Capacity Feeder (HCF).
Contains the media used for copy or print output.
Alternative to the 2-drawer HCF, the optional Oversized High Capacity Feeder
(OHCF) feeds oversized stock up to 13 x 19 in/SRA3 paper.
Load nonstandard paper, such as heavy stock or other special media, that
cannot be loaded in trays 1-4.
*The Oversized High Capacity Feeder (OHCF) is not available
with the 4590 Copier/Printer.
1. P r o du c t O v e r v ie w
Function
1-3