Xerox 4110 Getting Started page 13

1. P r o d uc t O v e r v i ew
No. Component
27 Post-process inserter
(Cover/Transparency
separator tray) / Tray 8
28 Decurl button
29 Output tray
30 Finisher tray
31 Booklet output tray
32 Booklet output tray button
33 Right cover
34 Staple cartridges for
booklet
35 Staple cartridge
36 Punch scrap container
37 Tri-Fold output tray
(optional)
38 Tri-Fold output tray button
39 Left cover.
40 Staple cartridge storage
space
41 Staple waste container
1- 7
Load paper for cover or transparency separators. Paper loaded here is
not used for copying.
For lighter weight paper especially, press this button to decurl the output.
Copies are delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated, or Normal.
Receives copies when you select stapled, punched, and Z-folded copies.
Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
Press this button to deliver and retrieve booklets from the output area.
Open to clear paper jams, replace staples, clear jammed staples, or
remove the scraps from the puncher.
There are two staple cartridge for booklet. Remove this cartridge to
replace staples and clear staple jams.
Contains staples; remove this cartridge to replace staples and clear
staple jams.
Collects the scraps from the puncher. Open to remove the scraps.
Receives copies when you select Tri-Fold In or Tri-Fold out.
Press this button to open tri-Fold output tray.
Open this cover to access the machine and to clear paper jams.
Staple cartridge for replacement can be stored (D Finisher only).
Container for staple waste; remove this cartridge when full (D2 Finisher
only).
NOTE 1: Throughout this guide, Finisher D, Booklet Finisher D, or
Finisher D2 may be referred to simply as the Finisher.
NOTE 2: Throughout this guide, the Duplex Automatic Document
Feeder is abbreviated as "Document Feeder" or "DADF."
X e r o x 4 59 0 /4 11 0 Co p ie r / Pr in t er G et ti n g Sta r te d
Function