Change/Confirm The Tray Settings; Change/Confirm The Tray Settings From The All Services; Screen - Xerox 4110 Getting Started

Change/confirm the tray settings

Change/confirm the tray settings from the All Services screen
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r G e t ti n g Sta r te d
If paper tray types have been changed, the settings must be
modified to reflect the paper that is loaded in the tray. The
following describes how to change or confirm the paper attributes
of the paper loaded in the trays.
NOTE: The UI screens shown may or may not reflect your system
configuration. The UI screens vary from system to system and
from marketplace to marketplace. Therefore, the UI screens
shown here are a representation of the type of screens that may
be seen on your particular system
You can manually confirm and/or change the paper settings (such
as weight, size, type, etc.) from the All Services/Setup Menu on
the printer UI.
KEY POINT: To change or confirm the tray settings from the All
Services screen, the System Administrator must program the
Setup Menu in System Settings so that the Paper Tray
Attributes feature is enabled. For more information, see your
System Administrator, or refer to the System Administration
Guide, Chapter 8, Setups, the section entitled "Setup Menu."
1. From the Printer UI All Services screen, select Setup
Menu.
2. Select Paper Tray Attributes.
3. Select the desired paper tray and select Change Settings.
4. If necessary, select Paper Size.
5. Select either Auto Size Detect or Variable.
• If you select Auto Size Detect, select save to save and
close the window.
• If you select Variable, the screen displays:
a. Select the width and height of the paper by selecting
the up, down, right, and left buttons.
b. Select Save.
6. Select Paper Type/Color.
7. Select the desired Paper Type and if applicable, the Paper
Color, and then select Save.
NOTE: If the optional OHCF (Tray 6) is attached, an additional
Paper Type option called Coated Stock is available.
Remember: The OHCF (Tray 6) is not available with the 4590
Copier/Printer.
8. Select Save to return to the Tray screen.
3 . Lo a di n g P ap e r
3-13