Table of Contents
Advertisement
Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the appliance
fully loaded and using the test cycle (see "Cycle Table").
Tests in accordance with EN 50242 must be carried out when the salt dis
penser in the water softener and the rinse aid dispenser have been filled with
salt and rinse aid respectively, and using the test cycle (see "Cycle Table").
Amount of detergent re
quired:
Rinse aid setting:
Example loading arrangements:
Upper basket
*) If there are cup racks in place on the lefthand side or the cutlery tray is in place, remove them.
Lower basket with cutlery basket
*) If necessary, you can remove the cup racks on the left hand side and/or the beer glass holder.
5g + 25g (Type B)
4 (Type III)
*)
*)
Full load: 12 place settings including serving dishes
Cutlery basket
Notes for Test Institutes
37
Advertisement
Table of Contents
