Table of Contents
Advertisement
Date/Time:
The date and time at which the document was
sent from the memory. In the case of broadcast
transmissions, the date and time for each indi-
vidual transmission is indicated.
Duration:
Duration.
Pages:
Number of pages transmitted.
Status:
Status of transmission set in memory. In the
case of broadcast transmissions, the status of
each individual transmission on the list will be
shown.
CHANGING, REPEATING OR CANCELLING A
TRANSMISSION ALREADY STORED
1.
Make sure you have set a transmission from
memory. The date and time and the "TX MEM
SET" message will alternate on the lower line of
the display.
RX ON FAX
TX MEM SET
2.
Press the
key.
1.MEMORY TX
3.
Press the
key.
SET NEW ACTIVITY
{
y
4.
Press the
NH\V
PRINT SETTINGS
,
Only to print the settings of one of the transmis-
sions set in the memory, press the
{
y
WR FKRRVH WKH PHPRU\ WUDQ
and then
mission you wish to print and then the
key. Having completed the printout, the fax ma-
chine automatically returns to the initial waiting
mode.
20
98%
/1-9
key
s-
,
If you wish to change, repeat or cancel a one of
the transmissions set previously, continue as
described below.
{ y
5.
Press the
other two available options: "CANCEL SET-
TINGS" or "MODIFY SETTINGS". The example
shows "MODIFY SETTINGS".
MODIFY SETTINGS
6.
Press the
key.
DOC.N. #XXXX
{ y
7.
Press the
the memory transmissions set is to be changed
or cancelled and then press the
confirm your choice.
,
If you choose "CHANGE PARAM.", continue
as indicated in steps 7 and 8 of the procedure
"Transmitting a document using the memory
immediately or at a preset time (delayed
transmission)".
,
If the transmission from memory has already
begun, the message "NOT ALLOWED" will be
displayed. In this case, as already stated, it
can only be modified if it is a broadcast trans-
mission, between transmission to one user and
the next.
,
If you choose "CANCEL SETTINGS", the fax
machine will clear the setting and the corre-
sponding document from the memory and then
return automatically to the initial waiting mode.
T
key to
RANSMITTING AND RECEIVING
Advertisement
Table of Contents
