Decoder Configure Software - HIKVISION DS-630XDI Series User Manual

Instruction:

Before configuration, user need to do the network configure according to the chapter 3.

Connect the decoder to the LAN.

Prepare a PC connected to the same LAN with the decoder.

4.1 Decoder Configure Software

Please open the accessory to get the disk, there is the iVMS4000 V2.0 software in it supplied by HIKVISION,
please double click the icon to set up it. The following section has described the configuration of decoder through
the software. Please refer to the user manual of iVMS 4000 V2.0 for more details.
The following figure shows the interface after access to the software:
Figure 4.1 software interface
Note:
this software is supplied by HIKVISION for configuration of the decoder; though it also has the function
of configuring the encoder, this chapter only instructs the decoder configuration. For other instructions, please
refer to the user manual of iVMS 4000 V2.0.