Network Configuration By Hyper Terminal - HIKVISION DS-630XDI Series User Manual

Flow control: None
Press "Apply" and "OK" after the setup. Press "Enter" under Hyper Terminal interface. When "[root@dvrdvs/]#"
appears, the connection is established.
Figure 3.1.4
Step5: Disconnect and save connection
According to the tips, disconnect and save "HK" for the next time. After saving, there will be a new "Hyper
Terminal" item established in the program group "Start"-> "Accessories"->"Communications"->"Hyper Terminal".
"Connection" names of all Hyper Terminal are included. You can see an icon named as "HK" here.

3.2 Network Configuration by Hyper Terminal

Enter Hyper Terminal
Click "Start"->"Programs"->"Accessories"->"Communications"->"Hyper Terminal"->"HK", then the Hyper
Terminal interface will appear as figure below. Type "Enter", and the prompt "[root@dvrdvs/]#" will appear which
means connection between RS232 interface of PC and RS232 interface of DS630XDI is established successfully
by Hyper Terminal. The following operation commands are to accomplish the parameters setup in the prompt.