Ptz Control - HIKVISION DS-630XDI Series User Manual

Configure the cycle decoding time
Click the icon "Setup"—"Software configuration" to configure the cycle decoding time. The default cycle time is
20s. After configuring the time , click the icon "save" to save the configuration.

4.5.3 PTZ control

If the decoder connected PTZ, user can operate the PTZ through
this software.
There are 8 keys to control PTZ directions, and the active bar to
change PTZ speed, which is adjustable from 1 to 7, and default
speed is 4.
Click key to start auto scan.
Click the function keys on the right to adjust focus, iris and
zoom.
If PC connected with 1002K/1003K keyboard or USB joystick, the PTZ can also be controlled by them.
Note:
When a division is in cycle decoding, PTZ control will pause, after PTZ control over, cycle decoding will
resume.
Call preset
BY double clicking the existed preset, it will transfer the preset of
current device.