Table of Contents
Advertisement
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive rubber bracket, hard drive
connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare
part number 740706-001.
Description
1 TB, 5400 rpm, 9.5 mm
750 GB, 5400 rpm, 9.5 mm
500 GB, 5400 rpm, 7.0 mm
mSATA solid-state drive, 24 GB (for use with select computer models with Intel processors,
HM86 Express chipsets, and switchable discrete graphics)
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Optical drive (see
b.
Keyboard (see
c.
Service door (see
d.
WLAN module (see
e.
Memory module (see
f.
Top cover (see
Battery on page
42), and then remove the following components:
Optical drive on page
Keyboard on page
54)
Service door on page
WLAN module on page
Memory module on page
Top cover on page
59)
48)
43)
46)
44)
Component replacement procedures
Spare part number
676521-005
634250-005
683802-005
732085-001
63
Advertisement
Table of Contents
