MULTIQUIP Power DCA85USJ2 Operation And Parts Manual page 31

9. The parameter that is highlighted is the selected
parameter for the screen. Use the "Arrow Buttons" to
highlight the new parameter to be placed in the
quadrant selected in the previous screen.
ENGINE SPEED
ENGINE HOURS
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL TEMPERATURE
ENGINE OIL PRESSURE
10. Touch the "Enter Button" to change the selected
parameter in the quadrant to the new parameter.
ENGINE SPEED
ENGINE HOURS
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL TEMPERATURE
ENGINE OIL PRESSURE
11. Use the "Menu Button" to return to the "4-Up
Custom Setup" screen.
ENGINE SPEED
ENGINE HOURS
ENGINE COOLANT TEMPERATURE
BATTERY POTENTIAL
ENGINE OIL TEMPERATURE
ENGINE OIL PRESSURE
12. The parameter in the selected quadrant has changed
to the parameter selected in the previous screen.
125°F
COOL TEMP
143°F
OIL TEMP
13. Repeat the parameter selection process until all spaces
are fi lled.
DCA85USJ2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #1 (03/22/11) — PAGE 31
3
The number to the right
1
of the parameter indicates
the quadrant in which it
2
is displayed.
4 1= Upper Left Quadrant
2 = Lower Left Quadrant
3 = Upper Right Quadrant
4 = Lower Right Quadrant
3
1
2
4
3
1
2
4
Note the number to
the right of the selected
parameter indicating that the
parameter is now assigned
to that display location
1000 RPM
ENG RPM
57 PSI
OIL PRES
DIAGNOSTIC DISPLAY
14. Touch the "Menu Button" to return to the main menu.
125°F
COOL TEMP
143°F
OIL TEMP
15. Touch the "Menu Button" to exit the Main menu and
return to the engine parameter display.
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONFG
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
Utilities (information and troubleshooting)
1. Starting at the single or four engine parameter display,
touch the "Menu Button".
0 3000
1500
1800 RPM
ENG RPM
COOL TEMP
2. The main menu will be displayed. Use the "Arrow
Buttons" to scroll through the menu until the "Utilities"
is highlighted.
STORED CODES
ENGINE CONF
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
UTILITIES
3. Once the "Utilities" menu item has been highlighted,
touch the "Enter Button" to activate the "Utilities"
functions.
STORED CODES
ENGINE CONF
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
UTILITIES
1000 RPM
ENG RPM
57 PSI
OIL PRES
125°F
1000 RPM
COOL TEMP
ENG RPM
143°F 57 PSI
OIL PRES
OIL TEMP
125°F
1000 RPM
COOL TEMP
ENG RPM
143°F 57 PSI
OIL PRES
OIL TEMP
G
G