Paper Misfeed In The Bypass Tray - Toshiba E-studio2555c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE
Pull out the right-hand tray and remove the misfed
2
paper.
Check that there is no folded/curled paper or
3
overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
 Paper misfeed in the bypass tray
Move the green paper holding lever toward the
1
outside.
The paper can now be removed.
Pull out the misfed paper in the bypass tray.
2
Place paper in the bypass tray again and then move
3
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
2
1
1
21