1.TROUBLESHOOTING FOR THE HARDWARE
Close the front cover of the finisher.
22
Paper misfeed in the Inner Finisher and the Hole Punch Unit
1
Lift up the control panel and then open the front cover
of the finisher.
While holding the green lever, move the finisher to the
2
left until it stops.
Pull down the green lever on the right-hand unit of the
3
finisher.
The paper exit of the equipment opens.
Turn the green dial clockwise to send the paper and
4
remove it.
1 TROUBLESHOOTING FOR THE HARDWARE
2
2
Clearing a Paper Misfeed
1
2
1
1
37