Toshiba E-studio2555c Troubleshooting Manual page 29

1.TROUBLESHOOTING FOR THE HARDWARE
Close the Hole Punch Unit cover.
7
Close the Bridge Kit cover.
8
9 Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right
side of the lever.
Paper misfeed in the lower receiving tray
Raise the lever and open the upper receiving tray of
1
the finisher.
Remove the misfed paper.
2
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Paper Misfeed
1
27