Starting The Fieldbus Application - Emerson 375 User Manual

4-6
STARTING
THE
FIELDBUS
APPLICATION
Figure 4-1. Fieldbus Application menu screen example
A general warning message may appear upon
starting the Fieldbus Application when an LAS is
detected on the segment. Select YES to proceed
to the live list, NO to return to the 375 Main Menu,
or HELP to get more information on the warning.
To start the fieldbus application:
1. Turn on the 375 Field Communicator. The 375
Main Menu is displayed; see Figure 4-1.
2. Double-tap F
If a live fieldbus device is connected to the 375
Field Communicator, the Fieldbus Application
main menu will briefly display followed by the
Live Display List.
If insufficient voltage is detected, a warning will
appear saying "No FF Segment Voltage
Detected. Press OK to go to the FF Main Menu."
Press OK to navigate to the Fieldbus Application
main menu.
A connection warning message may appear if no
communication is detected. This means that an
LAS is not recognized by the segment and typically
occurs when connecting to a single device.
Fieldbus Application.
OUNDATION
Fieldbus Functionality