Emerson 375 User Manual page 16

2-4
Starting the
375 Field
Communicator
Shutting down
Press and hold the on/off key until the Multifunction
LED flashes to indicate the unit is powering
(approximately two seconds). See Figure 2-2 for
on/off key location.
During start-up, the 375 Field Communicator will
automatically install any software upgrades
available on the System Card. Once complete, the
375 Main Menu will be displayed. After starting the
375 Field Communicator, you can choose to:
• Launch the HART or F
Applications (if licensed)
• Configure/view Settings
• Enter Listen for PC
• Launch the ScratchPad application
While applications are open, the on/off key is
disabled. You must exit to the 375 Main Menu
before using the on/off key. To shut down the 375
Field Communicator press and hold the on/off key
until the display turns off (approximately three
seconds).
Learning the Basics
fieldbus
OUNDATION