Starting The Hart Application; Starting The Fieldbus Application; Running The Settings Menu; About 375 - Emerson 375 User Manual

2-10
Starting the
HART
application
Starting the
fieldbus
application
Running the
Settings menu
From the 375 Main Menu double-tap HART
Application to run the HART application. On
startup, the HART Application will automatically
poll for devices.
From the 375 Main Menu double-tap Foundation
Fieldbus Application to run the fieldbus
application.
From the 375 Main Menu double-tap Settings to
view the Settings menu.The Settings menu allows
you to set preferences for the 375 Field
Communicator. The Settings menu also allows you
to view system properties and license information.
To access the 375 Field Communicator settings:
1. From the 375 Main Menu select Settings.
2. Select the desired setting from the Settings
menu.

About 375

About 375 allows you to view the software property
revisions of your particular 375 Field
Communicator. If you need to call technical
support personnel, have the System Software
version, Communication and Diagnostic Circuitry
(CDC) version, and the Operating System version
on hand.
Launching the RE-FLASH initiates the
reinstallation of the system software from the
System Card. This should only be performed under
the direction of technical support personnel.
Learning the Basics