Emerson 375 User Manual page 85

Troubleshooting
DD Error..."developed-to mismatch"...DD version
<manufacture name, device name, dev. rev. #, and
DD rev. #>; HART application <version x.y>; HART app
version x.y...Reinstall DD...See Programming Interface for
details
DD Error..."DD header file corrupted"...Reinstall Device
version <manufacture name, device name, dev. rev. #, and
DD rev. #>; HART application <version x.y> ...See
Programming Interface for details
Hart Application Error..."data compression dll is
missing"...Reinstall System Files...See User's Manual for
details
Hart Application Error..."data compression dll is
corrupted"...Reinstall System Files...See User's Manual for
details
Memory Error..."data compression memory allocation
error"...Restart Unit...See User's Manual for further details
DD Error..."failure while opening DD"...Reinstall Device
Type x Device Rev x dd Rev x...See Programming
Interface for details
DD Error..."failure while uncompressing DD"...Reinstall
Device revision <manufacture name, device name, dev.
rev. #, and DD rev. #> ...See Programming Interface for
details
Communication Error..."unexpected return value"...See
User's Manual for solution
DD Error..."DD file corrupted"...Reinstall Device revision
<manufacture name, device name, dev. rev. #, and
DD rev. #>...See Programming Interface for details
Forward Compatibility Blocked...DD Device Type x Device
Rev x dd Rev x cannot be used in forward compatibility
mode...x... Do you wish to proceed in forward compatibility
mode?
DD Not Installed...DD device type x device rev x is not
installed on the System Card...See Programming Interface
for details on DD updates...Do you wish to proceed in
forward compatibility mode?
This error message appears when
the DD was developed using a later
HART app revision.
This error message appears when
there is a check sum error in the DD
header file.
This error message appears when
the data compression component
can not be located.
This error message appears when a
required functionality is missing from
the data compression component.
This error message appears when
HART app is unable to acquire
enough memory for data
compression.
This error message appears when
the system can not open the DD file.
This error message appears when an
error is detected while
uncompressing the DD.
This error message appears when an
expected value returned from a
function call.
This error message appears when
the checksum of the DD does not
match with that described in the DD
header file.
This error message appears when
the HART app attempts to use a DD
to run in forward compatibility mode
and finds that the DD is prevented
from running in forward compatibility
mode
This error message appears when
the DD for the connected device is
not in the unit.
5-7