Emerson 375 User Manual page 42

3-6
6. If a warning appears, thoroughly read the
warning, tap CONT. to accept the warning and
proceed, or tap EXIT to end creating a new user
configuration.
7. Mark the configurable variables you want sent to
the HART device. Double-tap Mark all > OK to
have all variables marked. Double-tap Unmark
all > OK to clear the marks from all variables. A
"+" symbol indicates a mark to send. A "*"
symbol indicates a parameter has been
edited.To mark and edit variables individually:
a.Double-tap Edit individually to configure
specific variables before sending them to a
device.
b.Scroll through the list of variables and select
the variable you want to mark or edit.
c.To change the value for the selected variable,
tap EDIT, change the value, and tap ENTER.
d.To mark the selected variable, tap MARK. A
"+" symbol indicates a mark to send. A "*"
symbol indicates a parameter has been edited.
e.Repeat steps b through d for other variables as
necessary and tap EXIT when you are
finished.
8. To save a new configuration, double-tap Save
as... (The SAVE button will automatically bring
you to the Save as... menu.)
a.To change the location where the configuration
is saved, double-tap Location, select an
option, and tap ENTER.
b.To specify a name for the configuration,
double-tap Name, enter the name, and tap
ENTER.
c.Tap SAVE.
HART Functionality