Figure 3-4 Internet Connection With Enet Encap; Table 3-4 Internet Connection With Enet Encap - ZyXEL Communications P-660H-61 User Manual

LABEL
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
Network Address
Translation chapter for more details.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.
The following table describes the fields in this screen.
LABEL
IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a different one each time you connect to the Internet. The Single User
Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise
select Static IP Address and type your ISP assigned IP address in the IP Address text box
below.
Subnet Mask Enter a subnet mask in dotted decimal notation.
Refer to the IP Subnetting appendix to calculate a subnet mask If you are implementing
subnetting.
ENET ENCAP You must specify a gateway IP address (supplied by your ISP) when you use ENET ENCAP
Gateway in the Encapsulation field in the previous screen.
Wizard Setup
Table 3-3 Internet Connection with RFC 1483

Figure 3-4 Internet Connection with ENET ENCAP

Table 3-4 Internet Connection with ENET ENCAP

Prestige 660H Series User's Guide
DESCRIPTION
DESCRIPTION
3-7