Rgb To White Adjustment; Battery Life; Program Upload - Chauvet WELL User Manual

Wireless event led luminaire
Table of Contents

Advertisement

RGB to White
Adjustment

Battery Life

Program Upload

WELL™ 2.0 User Manual Rev. 01
Continued from previous page
This setting allows the user to select and edit the temperature of the white color shown
when RGB to White (RGBW) is active in SET > COLO (see Color Setting).
1) Go to CAL2 and
2) Press <ENTER> when you see RGB.W on the display.
3) Select a color (RED, GREN, or BLUE).
4) Select a color value (0~255).
5) Repeat for the other colors.
The values of RED, GREEN, and BLUE configured from RGB.W will define the color
temperature shown when the RGB faders are set to "255" if SET > COLO > RGBW is
active.
This setting allows the user to select the output intensity for a given runtime (battery life).
1) Go to SET.
2) Select LIFE.
3) Select a battery life (NORM or LONG).
When the LIFE parameter is set to NORM, the battery life is approx. 10 hours. When
the LIFE parameter is set to LONG, the battery life extends to approx. 12 hours.
This option allows the user to copy the custom programs of one WELL fixture onto other
WELL fixtures by using the Master/Slave method.
1) Configure and connect the fixtures in a Master/Slave arrangement, where the master
unit has the custom programs you want to transfer onto the slave units.
2) At the master unit, go to SET.
3) Select UPLD.
4) When PASS shows, press <ENTER>.
5) Enter the master access password as shown in Control Panel Lock.
6) When SEND shows, press <ENTER> to start the upload.
7) Wait for the upload process to finish (the display will show END) before continuing or
turning the fixtures off.
During and after the upload, the master and slave units will visually indicate the
status of the process, as follows:
· Yellow means that the upload is running.
· Red means that the upload failed due to an error.
· Green means that the upload completed successfully.
DO NOT upload the program from a WELL onto a different fixture. Otherwise, you
could render the other fixture inoperative.
Continues on the next page
Page 15 of 28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Well 2.0

Table of Contents