Additional Information; Optional System Settings; Setting The Sleep Timer; Dimming The Display - Pioneer LX03 Operating Instructions Manual

Additional information

Chapter 14
Additional information

Optional system settings

All the available settings in the System Setup
menu are listed below. See the notes in each
section for more information about the
settings. The first setting in each section is the
default.
SETUP
1 Press SETUP.
ENTER
2 Select 'System Setup' then press
ENTER.
ENTER
3 Choose the setting you want to
adjust, then press ENTER.
The available settings are shown in the front
1
panel display.
ENTER
4 Adjust the setting, then press
ENTER to confirm the settings and exit.

Setting the sleep timer

The sleep timer switches off the system after
about an hour so you can fall asleep without
2
worrying about it.
ENTER
1 Select 'Sleep Timer' from the
System Setup menu, then press ENTER.
Note
1 The setup menu is exited automatically after 5 minutes of inactivity.
2 The display dims when the sleep timer is set.
3 The display of the front panel dims when the sleep timer is set, regardless of this setting.
ENTER
2 Adjust the setting, then press
ENTER to confirm the settings and exit.
• Sleep On – Switches off after about an
hour. The indicator lights.
• Sleep Off – Cancels the sleep timer.
After selecting Sleep On, you can press SLEEP
again to check how much time is left. Each line
indicates approximately 12 minutes
(remaining):
S l e e p - - - - -

Dimming the display

You can adjust the brightness of the text in the
3
front panel display.
ENTER
1 Select 'Dimmer' from the System
Setup menu, then press ENTER.
ENTER
2 Adjust the setting, then press
ENTER to confirm the settings and exit.
• Dimmer Light – Brighter setting
• Dimmer Dark – Darker setting
14
69
En