Basic Playback Controls; Scanning Files; Playing A Jpeg Slideshow - Pioneer LX03 Operating Instructions Manual

iPod/USB playback
The USB terminal is located on the front panel.
iPod DIRECT / USB
OPEN / CLOSE
PHONES MCACC
iPod DIRECT/USB
3 Start playback.
If your USB memory device contains JPEGs, a
slideshow will start. See Playing a JPEG
slideshow below for more on this.
• Make sure USB DATA is showing in the
front panel display (or the system is in
standby) when disconnecting.
Important
If a USB Error message lights in the display, it
may mean that the power requirements of the
USB device are too high for this unit, or that the
device is incompatible. Try the following:
• Switch the player off, then on again.
• Reconnecting the USB device with the
player switched off.
• Selecting to another input source (like
DVD/CD), then back to USB.
• Using a dedicated AC adaptor (supplied
with the device) for USB power.
If this doesn't remedy the problem, it is likely
your USB device is incompatible.
Note
1 With WMA/MP3/MPEG-4 AAC tracks, playback automatically resumes at the end or beginning of the track.
2 • The time it takes for the player to load a file increases with large file sizes.
• USB devices can contain up to 299 folders and up to 648 folders and files combined.
USB mass
storage device

Basic playback controls

The following table shows the basic controls on
the remote for USB playback.
Button What it does
Starts normal playback.
Pauses/unpauses playback.
Stops playback.
Press to start fast reverse scanning.
/
Press to start fast forward scanning.
/
Skips to the start of the current file,
then previous files.
Skips to the next file.

Scanning files

You can fast-scan forward or backward at
various different speeds.
/ /
• During playback, start reverse
or forward scanning.
Press repeatedly to increase the scanning
speed (shown on-screen).
• To resume playback, press  (play).

Playing a JPEG slideshow

Press  to start a slideshow from the first
2
folder/picture. The pictures in each folder are
displayed in order.
• If the device contains WMA/MP3/MPEG-4
AAC files, playback of the slideshow and
audio files repeats. During audio playback,
you can still use the skip (/), scan
(/) and pause () functions.
07
1
43
En