Download Print this page

Pioneer BCS-727 Operating Instructions Manual

Pioneer blu-ray home theater systems operating instructions.
Hide thumbs

Advertisement

BCS-727
BCS-323
BCS-HW929
BCS-HF828
BCS-SB626
BCS-FS525
XV-BD421W
XV-BD121W
XV-BD921FSW
XV-BD821FSW
XV-BD621FSW
XV-BD521FSW
S-BD421
S-BD121
S-BD921HW
S-BD821HF
S-BD621FS
S-BD521FS
S-BD921SW
Operating Instructions / Mode d'emploi / Bedienungsanleitung /
Istruzioni per l'uso / Handleiding / Manual de instrucciones
Blu-ray Disc surround system
Système Home-Cinéma Blu-ray Disc
Blu-ray Disc Mehrkanal-System
Sistema surround con lettore Blu-ray Disc
Blu-ray Disc multikanaals systeem
sistema surround de Blu-ray Disc
Blu-ray Disc receiver
Système Home-Cinéma Blu-ray Disc
Blu-ray Disc Receiver
Sintoampli catore con predisposizione Blu-ray Disc
Blu-ray Disc receiver
receptor de Blu-ray Disc
Speaker System
Enceintes acoustiques
Lautsprechersystem
Sistema di di usori
Luidsprekersysteem
Sistemas de parlantes
Subwoofer / Enceinte d'extrêmes graves / Subwoofer /
Subwoofer / Subwoofer / Altavoz de subgraves

Advertisement

   Related Manuals for Pioneer BCS-727

   Summary of Contents for Pioneer BCS-727

  • Page 1

    BCS-727 Blu-ray Disc surround system BCS-323 Système Home-Cinéma Blu-ray Disc BCS-HW929 Blu-ray Disc Mehrkanal-System BCS-HF828 Sistema surround con lettore Blu-ray Disc Blu-ray Disc multikanaals systeem BCS-SB626 sistema surround de Blu-ray Disc BCS-FS525 XV-BD421W Blu-ray Disc receiver XV-BD121W Système Home-Cinéma Blu-ray Disc...

  • Page 2: Safety Information

    Safety Information Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

  • Page 3

    When you find it device for the unit, you will need to unplug it from the damaged, ask your nearest PIONEER authorized AC outlet to shut down all power. Therefore, make service center or your dealer for a replacement.

  • Page 4

    Notes on Copyrights For Wireless product European Union Notice PIONEER hereby declares that • Because AACS (Advanced Access Content this/these product(s) is/are in System) is approved as content protection compliance with the essential system for Blu-ray Disc format, similar to use...

  • Page 5

    Important Notice for TV colour system The colour system of this player differs according to currently playing discs. For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal. Only the multi system colour TV can receive all signals output from the player.

  • Page 6: Table Of Contents

    – Connecting the USB device Assemble the speakers Getting Started – Speaker setup for BCS-727 – Wall mounting the speaker for BCS-727 Making settings using the Setup Navigator – Additional notes on speaker for BCS-727 menu – Positioning the system for BCS-727 Operating the TV with the player’s remote...

  • Page 7

    – Playing in the desired order (Programmed – Listening to the radio Play) – Presetting the radio stations – Making bookmarks – Deleting all the saved stations – Zoom – Improving poor FM reception – Playing photos as slideshows – Seeing information about a radio station –...

  • Page 8: Before You Start

    Before you start Chapter 1 Accessories of speaker box Before you start (BCS-727) Introduction Supplied accessories Non-skid pads (2) Screws M4 x 16 (16) (They are used to fix to the base and lower cabinet.) Video cable (1) Remote control (1)

  • Page 9: Accessories Of Speaker Box (bcs-hf828)

    Before you start Accessories of speaker box Accessories of speaker box (BCS-HF828) (BCS-FS525) Small non-skid pads (1) Base (2) Stand arm (2) Large non-skid pads (1) Bracket (2) Large non-skid pads (1) • Screw (Bind head) (2) • Screw (Flat head) (4) Large poles (2) Small poles (2) • Hexagonal nut (2)

  • Page 10: Putting The Batteries In The Remote Control

    Close securely (a click should be heard). public institution’s rules that apply in your country/ area. Software update Product information on this player is provided on the Pioneer website. Check this website for update and service information on your Blu-ray disc player. IN Europe: http://www.pioneer.eu/...

  • Page 11: Types Of Discs/files That Can Be Played

    Before you start Types of discs/files that can be played Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played. Caution • Only the discs that have been finalized can be played. Application format Disc type Logo...

  • Page 12

    Before you start • "Blu-ray Disc", "Blu-ray" and "Blu-ray Disc" logo  About audio formats are trademarks of Blu-ray Disc Association. The following audio formats are supported on • is a trademark of DVD Format/Logo this player: Licensing Corporation. • Dolby TrueHD • Dolby Digital Plus ...

  • Page 13

    Before you start  Playing DVDs "BONUSVIEW" is trademark of Blu-ray Disc Association. This label indicates playback compatibility with BD-LIVE functions such as downloading DVD-RW discs recorded in VR format (Video movie trailers or additional audio and Recording format). However, for discs recorded subtitle languages and playing on-line with a record-only-once encrypted program, games can be enjoyed over the Internet.

  • Page 14: Playing Cds

    Before you start  Playing CDs  About video, audio, and image files and folders Regarding copy protected CDs: This player is designed to conform to the specifications Audio and image files can be played on this of the Audio CD format. This player does not player when the folders on the disc or USB support the playback or function of discs that device are created as described below.

  • Page 15: Playable Files

    Before you start Playable files Note Video, image and audio files recorded on ® • This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) DVDs, CDs or USB devices can be played. content. First generate the DivX VOD registration code for your device and submit it during the Caution registration process.

  • Page 16

    Before you start  Table of Playable Files Playable media BD-R/RE/-R DL/ Playable files RE DL/-R LTH, File specifications (Extensions) DVD-R/RW/-R DL/ USB devices Network +R/+RW/+R DL, CD-R/RW Sampling frequencies: Up to 48 kHz Bit rate: Up to 320 kbps (.mp3) Audio type: MPEG-1 Audio Layer 3 Sampling frequencies: Up to 48 kHz...

  • Page 17: Trademarks And Licenses

    Before you start Trademarks and licenses The terms HDMI and HDMI High-Definition “x.v.Colour”, Multimedia Interface, and the HDMI Logo are trademarks of Sony Corporation. trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or Manufactured under license from Dolby...

  • Page 18: Remote Control

    Before you start Remote control • • • • • • • • • 1 • • • • • • • • •  (STANDBY/ON): Press to turn the power on and off. FUNCTION: Changes the input source or function. When switching while viewing the display window on the player 1.

  • Page 19

    Before you start • • • • • • • • • 3 • • • • • • • • • • • • • • • • • • 6 • • • • • • • • • VIRTUAL 3D SOUND: Switch VIRTUAL 3D 0-9 numerical buttons: Selects numbered SOUND effects (See page 75). options in a menu or inputs letters in the keypad menu.

  • Page 20: Front Panel

    Before you start Front panel 1 Disc tray 3 MIC 2 Operation buttons 4 PORTABLE IN  (STANDBY/ON) 5  (PLAY/PAUSE) Switches the unit ON or OFF. 6 USB port Note 7 Volume control If the power does not turn OFF, pressing the 8 Remote control sensor ...

  • Page 21: Rear Panel

    Before you start Rear panel BCS-727/BCS-323 BCS-HW929/BCS-HF828/BCS-SB626/BCS-FS525 1 AC IN 8 iPod Plug into the power source. Connect to the furnished iPod cradle. 2 SPEAKERS connectors 9 OPTICAL IN 1/2 3 Cooling Fan a HDMI OUT 4 VIDEO OUT b HDMI IN 1/2...

  • Page 22: Connecting

    1 Insert the lower cabinet to the base so that the cable hole is positioned at the backside. Assemble the speakers Speaker setup for BCS-727 Preparing the speakers 1. Connect the wires to the player. Insert the cables connected to the player to the same colored connector on the speaker.

  • Page 23: Wall Mounting The Speaker For Bcs-727

    If the unit is assembled with foreign matter • Pioneer is not responsible for any accidents or stuck between the base and lower cabinet, the unit damage that result from improper installation.

  • Page 24: Additional Notes On Speaker For Bcs-727

    Additional notes on speaker Front left speaker (L)/ Front right speaker (R): for BCS-727 Place the front speakers to the sides of the monitor or screen and as flush with the screen Install the main front left and right speakers at surface as possible.

  • Page 25: Speaker Setup For Bcs-323

    To prevent the risk of electric shock when connecting or disconnecting the speaker cables, • Pioneer is not responsible for any accidents or disconnect the power cord before touching any damage that result from improper installation.

  • Page 26: Additional Notes On Speaker For Bcs-323

    Connecting Additional notes on speaker Front left speaker (L)/ Front right speaker (R): for BCS-323 Place the front speakers to the sides of the monitor or screen and as flush with the screen Install the main front left and right speakers at surface as possible.

  • Page 27: Speaker Setup For Bcs-hw929

    Connecting Speaker setup for BCS-HW929 2. Connect the wires to the player. Insert the cables connected to the player to Preparing the speakers the same colored connector on the speaker. 1. Attach the non-skid pads to the base of each speaker. For front speaker: Use the supplied adhesive to attach six pads to the base (bottom) of speaker.

  • Page 28: Wall Mounting The Speaker For Bcs-hw929

    Caution • If you are unsure of the qualities and strength of the wall, consult a professional for advice. • Pioneer is not responsible for any accidents or damage that result from improper installation. 1. Remove the base plates. The base plates are held in position by the use of 2-sided tape. While holding the leg in...

  • Page 29: Additional Notes On Speaker For Bcs-hw929

    Pioneer logo is oriented as shown in the accompanying illustration.

  • Page 30: Speaker Setup For Bcs-hf828

    Connecting Speaker setup for BCS-HF828 2. Fasten the speaker to the base use the horizontal mounting screw from the back side of the base. Preparing the speakers For subwoofer: Horizontal mount Use the supplied adhesive to attach four large screw pads to the base of subwoofer.

  • Page 31

    Connecting 3. Affix the seal on the screw head. Caution • Do not connect any speakers other than those supplied to this system. Seal • Do not connect the supplied speakers to any amplifier other than the one supplied with this system.

  • Page 32: Wall Mounting The Speakers For Bcs-hf828

    • If you are unsure of the qualities and strength of the wall, consult a professional for advice. Open two holes in the wall 95 mm apart. • Pioneer is not responsible for any accidents or damage that result from improper installation. 1. Use the vertical mounting screw to fasten the wall mounting fixture to the speaker system.

  • Page 33: Additional Notes On Speaker For Bcs-hf828

    Connecting Additional notes on speaker Positioning the system for for BCS-HF828 BCS-HF828 Install the main front left and right speakers at The following illustration shows an example equal distance from the TV. of positioning the system. Note that the illustrations in these instructions differ from Precautions: the actual unit for explanation purposes.

  • Page 34: Speaker Setup For Bcs-sb626

    Connecting Speaker setup for BCS-SB626 2. Attach the speaker stand bases to the speaker. Preparing the speakers Attach both right and left speaker stands to the rear of the speaker. The height of For subwoofer: the speaker stands can be adjusted in two Use the supplied adhesive to attach four large levels;...

  • Page 35: Wall Mounting The Speaker For Bcs-sb626

    • Please connect the speaker cable of subwoofer • Pioneer is not responsible for any accidents or (purple) to orange of the player. damage that result from improper installation.

  • Page 36: Additional Notes On Speaker Placement For Bcs-sb626

    Connecting Additional notes on speaker Positioning the system for placement for BCS-SB626 BCS-SB626 Install the speaker below the TV, in the center position. Precautions: Do not rest the speaker on the TV itself. Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal.

  • Page 37: Speaker Setup For Bcs-fs525

    Connecting Speaker setup for BCS-FS525 3. Pass the speaker wire through the hole on the pole. Preparing the speakers For subwoofer: Use the supplied adhesive to attach four large pads to the base of subwoofer. Large non-skid pads 4. Secure the speaker and the pole with 2 screws.

  • Page 38

    Connecting 3. Secure the speaker and the pole with 2 For direct installation screws. Ensure that the speaker wire does Use the supplied adhesive to attach 4 pads to not get pinched between the speaker and the base of the front speakers. the pole.

  • Page 39: Wall Mounting The Speakers For Bcs-fs525

    • Pioneer is not responsible for any accidents or back side of the speaker is on the outside on damage that result from improper installation.

  • Page 40: Additional Notes On Speaker Placement For Bcs-fs525

    Connecting Additional notes on speaker Positioning the system for placement for BCS-FS525 BCS-FS525 Install the main front left and right speakers at The following illustration shows an example an equal distance from the TV. of positioning the system. Note that the illustrations in these instructions differ from Precautions: the actual unit for explanation purposes.

  • Page 41: Connecting To Your Tv

    Connecting Connecting to Your TV HDMI connection If you have a HDMI TV or monitor, you can Make one of the following connections, connect it to this player using a HDMI cable depending on the capabilities of your existing ® (High Speed HDMI /™...

  • Page 42: Arc (audio Return Channel) Function

    Connecting ARC (Audio Return Channel) Video connection function Connect the VIDEO OUT terminal on the player to the video in terminal on the TV using a video The ARC function enables an HDMI capable TV cable. You can hear the sound through the to send the audio stream to HDMI OUT of this system’s speakers.

  • Page 43: Antenna Connection

    Connecting Antenna connection Connections with external device Connect the supplied antenna for listening to the radio. AUX connection You can enjoy the sound from an external component through the speakers of this system. Connect the analog audio output terminals of your component into the AUX L/R (INPUT) on this unit.

  • Page 44: Portable In Connection

    Connecting PORTABLE IN connection OPTICAL IN 1/2 connection You can enjoy the sound from your portable You can enjoy the sound from your component audio player through the speakers of this with a digital optical connection through the system. speakers of this system. Connect the headphones (or line out ) terminal Connect the optical output terminal of your of the portable audio player into the PORTABLE...

  • Page 45: Hdmi In 1/2 Connection

    Bluetooth® ADAPTER You can enjoy the pictures and sound from your component through this connection. When the Bluetooth ADAPTER (Pioneer Model Connect the HDMI OUT terminal of your No. AS-BT100 or AS-BT200) is connected to component into the HDMI IN 1 or 2 terminal this unit, a product equipped with Bluetooth on this unit.

  • Page 46: Connecting To Your Home Network

    Connecting Connecting to your Home Network Broadband service This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as BD-LIVE interactivity and Online content services.

  • Page 47: Wireless Network Connection

    Connecting Wireless network connection Wireless network setup Another connection option is to use an For the wireless network connection, the player Access Point or a wireless router. The network needs to be set up for network communication. configuration and connection method may vary This adjustment can be done from the [Setup] depending on the equipment in use and the menu.

  • Page 48

    Connecting 4 Finish entering the security code by selecting [Enter] using / / / and pressing ENTER. 7. Select [Next] using / / / and press ENTER. If it connects success, it will display connection success and IP is obtained. 8.

  • Page 49: Wps Setup (wi-fi Protected Setup)

    Connecting WPS setup 7. When connecting using PBC (Push Button), on the [PBC] screen use / (Wi-Fi Protected Setup) to select NEXT, then press ENTER. Then press the WPS button on the access WPS connection setting point within 120 seconds. 8. When connecting using PIN confirm WPS is abbreviation of Wi-Fi Protected Setup. the PIN Code on the [PIN] screen.

  • Page 50

    Connecting • Some internet contents may require a higher • For the purpose of the better transmission, bandwidth connection. placing the player from the access point as close as possible. • Even if the player is properly connected and configured, some internet contents may • In some instances, placing the access point not operate properly because of internet or wireless router at least 0.45 m above the...

  • Page 51: Usb Device Connection

    Connecting USB device connection This player can play movie, music and photo files contained in the USB device. 1. Insert a USB device to the USB port until it About USB devices fits into place. The USB devices that can be connected to the player are as shown below.

  • Page 52: Getting Started

    HDMI OUT • After Initial Setup format. terminal, language settings are imported • After updating the player’s software. from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins. Caution 5. Select the appropriate output resolution • Before turning on the power, check that the...

  • Page 53: Operating The Tv With The Player's Remote Control

    Press the number buttons (0 to 9) to input the code while pressing TV CONTROL . Note y The factory default setting is 00 (PIONEER). y If you make a mistake when inputting the code, release TV CONTROL  then start over from the beginning.

  • Page 54: Tv Preset Code List

    Getting Started TV preset code list Manufacturer Code(s) PIONEER 00, 31, 32, 07, 36, FRONTECH 31, 42, 46 MAGNAVOX 07, 10, 03, 12, SALORA 31, 32, 42, 43 42, 51, 22 FRONTECH/PROTECH 32 SAMBERS 49 ACURA 44 FUJITSU 48 MANESTH 39, 46...

  • Page 55: Playback

    Playback Chapter 4  If the disc menu is displayed Playback For some discs, the disc menu is displayed automatically when playback starts. The contents of the disc menu and the way to Playing discs or files operate depend on the disc. ...

  • Page 56: Forward And Reverse Scanning

    Playback Forward and reverse scanning Step forward and step reverse  During playback, press REV or  While playback is paused, press / or /. FWD. y The scanning speed switches each time y The picture moves a step forward or the button is pressed.

  • Page 57: Playing In The Desired Order (programmed Play)

    Playback Making bookmarks  To cancel Repeat Play y Press REPEAT several times during You can make bookmarks on the video Repeat Play. currently playing and play back the scene later. Note  During playback, press BOOKMARK. y The bookmark is made. y Repeat Play is canceled in the following cases: –...

  • Page 58: Playing Photos As Slideshows

    Playback Playing photos as slideshows Switching the subtitles This function plays the photos, switching them For discs or files on which multiple subtitles automatically. are recorded, the subtitles can be switched during playback.  During playback, press INDEX. y Display the thumbnail of image files. The Caution maximum number is 12 at once.

  • Page 59: Switching The Audio

    Playback Switching the audio Displaying the disc information For discs or files on which multiple audio streams/channels are recorded, audio streams/  Press DISPLAY. channels can be switched during playback. The disc information appears on the TV screen.  During playback, press AUDIO. To switch off the information display, press y The current audio and total number of DISPLAY again.

  • Page 60: Enjoying Bonusview Or Bd-live

    Playback Enjoying BONUSVIEW or Note BD-LIVE • Operation of USB flash drives is not guaranteed. • Playback of BD-LIVE function data differs This player is compatible with BD-Video depending on the disc used. For details, consult BONUSVIEW and BD-LIVE. the user instructions supplied with the disc. When using BD-Video discs compatible with • To enjoy the BD-LIVE function, a network BONUSVIEW, you can enjoy such functions...

  • Page 61: Playback Functions

    Playback Playback functions The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. Disc/file type DVD-R Function BD-R DVD- /-RW...

  • Page 62: Using The Tools Menu

    Playback Using the TOOLS menu Item Description Still off Switch off the BD-ROM’s still picture. Various functions can be called out according Ins Search Skip forward 30 seconds. to the player’s operating status. Ins Replay Skip backward 10 seconds. 1. Display the TOOLS menu. Slide Show Switch the playback speed while Press TOOLS during playback.

  • Page 63: Playing A Specific Title, Chapter, Track Or File (search)

    Playback Playing a specific title, chapter, Continuing playback from a track or file (Search) specified position (Continued Viewing Playback) 1. Select Title or Chapter (track/file). Use / to select, then press ENTER. This function allows you to continue playback from a position you specify to be played next 2.

  • Page 64: Playback From Home Media Gallery

    Playback from Home Media Gallery Chapter 5 Note Playback from Home • The Home Media Gallery allows you to play files on media servers connected to the same Local Area Media Gallery Network (LAN) as the unit. • The following files are allowed to be played from Home Media Gallery: About Home Media –...

  • Page 65

    Pioneer is not responsible for any malfunction • Supported file formats vary by server. As of the player and/or the Home Media such, files not supported by your server Gallery features due to communication are not displayed on this unit.

  • Page 66: Playback File On The Network

    Playback from Home Media Gallery Playback file on the Disc/USB playback network 1. Press HOME MEDIA GALLERY to display the Home Media Gallery. 1. Press HOME MEDIA GALLERY to The Home Media Gallery can also be display the Home Media Gallery. displayed by selecting Home Media Gallery The Home Media Gallery can also be from Home Menu, then pressing ENTER.

  • Page 67: Playing In The Desired Order (playlist)

    Playback from Home Media Gallery Playing in the desired Playing the playlist order (Playlist) 1. Press HOME MEDIA GALLERY to display the Home Media Gallery. The discs that can add tracks and files to the The Home Media Gallery can also be Playlist are as shown below.

  • Page 68: Playing The Web Contents

    Third party content services may be changed, suspended, interrupted, or discontinued at any time without notice, and Pioneer disclaims any liability in connection with such occurrences. Pioneer does not represent or warrant that content...

  • Page 69: Other Operating

    Other Operating Chapter 7 7. Start recording. Use / / / to select [Start] and press Other Operating ENTER to start recording. 8. Exit CD recording display. Use / / / to select [Cancel] then press Recording Audio CD to a ENTER after recording has finished.

  • Page 70: Ipod/iphone Playback

    • Some iPod allow the TV output setting to be • Installing software versions other than changed while connected. indicated on the website of Pioneer to your • When the iPod/iPhone is disconnected from this iPod/iPhone may result in incompatibility unit, the iPod/iPhone’s TV output setting returns to with this system.

  • Page 71: Playing Your Ipod/iphone

    Other Operating Playing your iPod/iPhone Important • If this unit cannot play your iPod/iPhone, Caution perform the following troubleshooting • When your iPod/iPhone is connected to this unit checks: and you wish to operate the iPod/iPhone directly, – Check whether the iPod/iPhone is be sure to hold the iPod/iPhone steady with the supported by this unit.

  • Page 72: Radio Operations

    Other Operating Radio Operations Improving poor FM reception Press AUDIO on the remote control. This will Be sure that FM aerial is connected. (Refer to change the tuner from stereo to mono and the page 43) usually improve the reception. Listening to the radio Seeing information about a 1.

  • Page 73: Bluetooth® Adapter For Wireless Enjoyment Of Music

    Pin code: 0000 This unit cannot be set with any PIN code Note other than 0000. • Pioneer does not guarantee proper connection and 4. When the unit and a Bluetooth operation of this unit with all Bluetooth wireless technology enabled devices.

  • Page 74: Karaoke

    Other Operating Karaoke Note • This unit does not support AVRCP . 1. Press KARAOKE on the remote control. • This unit does not support Mono Headset Profile Karaoke Setup under Initial Setup will be (Hands Free Profile). displayed on the TV screen. • A Bluetooth wireless technology enabled device cannot be operated by this unit.

  • Page 75: Sound

    Virtual 3D Max Effect is maximum 5 Speaker Mode1 The sound from the front speakers will also be output by the rear (BCS-727/BCS-323) speakers. This mode is valid in both 2 channel audio source and 5.1 channel audio source. 5 Speaker Mode2...

  • Page 76: Advanced Settings

    Advanced settings Operating the initial setup Chapter 8 Advanced settings screen 1. When playback is stopped, display the Changing the settings Home Menu screen. HOME MENU. Press 2. Select and set Initial Setup. Use / to select, then press ENTER. 3.

  • Page 77

    Advanced settings Setting Options Explanation DRC (Dynamic Range Select this to output audio signals without using the DRC function. Control) Select this to adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog or when watching movies at midnight.

  • Page 78

    Advanced settings Setting Options Explanation IP Setting Select this to set the IP address of the player and DNS server (page 80). Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 81). Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server (primary) and DNS server (secondary).

  • Page 79

    Advanced settings Setting Options Explanation Setup Navigator Start making the settings using the Setup Navigator menu. For details, see page 52. Change Password Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with the parental lock feature (page 82). Parental Control Change the player’s parental lock level (page 82).

  • Page 80: Adjusting The Video

    Advanced settings  Adjusting the video  Setting the IP address 1. Select and set Display Setting d Video 1. Select and set Network d IP Setting d Adjust d Next Screen. Next Screen. Use / to select, then press ENTER. Use / to select, then press ENTER.

  • Page 81: Language Setting

    Advanced settings  Setting the proxy server  Testing the network connection Only set the proxy server if so instructed by  Select and set Network d Connection your Internet service provider. Test d Start. Use / to select, then press ENTER. 1.

  • Page 82

    Advanced settings  Registering or Changing the password  Changing the Parental Lock level for viewing DVDs/BD-ROMs Use this procedure to register or change the code number required for the Parental Some DVD-Video discs containing scenes Lock settings. of violence, for example, have Parental Lock About default password of this unit levels (check the indications on the disc’s jacket or elsewhere).

  • Page 83: Software Updating

    Internet). Product information on this player is provided y Steps 6 to 8 are the operations performed on the Pioneer website. Check the website (automatically) by the player (they are intended to update the software). shown on page 10 for update and service information on your Blu-ray disc player.

  • Page 84: Restoring All The Settings To The Factory Default Settings

    USB flash drive or disc. Carefully read 2. When playback is stopped, display the the instructions on downloading update files Home Menu screen. provided on the Pioneer website. Press HOME MENU. y Store the update file in the root directory of the USB flash drive or disc.

  • Page 85: Language Code Table And Country/area Code Table

    Advanced settings Language code table and country/area code table  Language code table Language name, language code, input code Abkhazian, ab/abk, 0102 French, fr/fra, 0618 Malagasy, mg/mlg, 1307 Slovenian, sl/slv, 1912 Afar, aa/aar, 0101 Galician, gl/glg, 0712 Malay, ms/msa, 1319 Somali, so/som, 1915 Afrikaans, af/afr, 0106 Georgian, ka/kat, 1101...

  • Page 86: Troubleshooting

    Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

  • Page 87: Sound

    Troubleshooting Sound Problem Check Remedy y No sound is output. y Is the disc played back in No sound is output during slow motion play and forward and reverse slow motion? scanning. y Sound is not output properly. y Is the disc played back in fast forward or fast reverse? Are the cables properly y Connect the cable properly according to the connected devices...

  • Page 88: Control Function

    Control function are connected between the Control-compatible device and the player. y See page 16. y Even when connected to a Pioneer product compatible with the Control function, some of the functions may not work. Also refer to the operating instructions for the connected device.

  • Page 89

    Troubleshooting Problem Check Remedy The component connected to If the client is automatically authorized, you need to enter the the network is not properly set. corresponding information again. Check whether the connection status is set to “Do not authorize”. There are no playable audio Check the audio files stored on the component connected to the files on the component network.

  • Page 90: Others

    Troubleshooting Others Problem Check Remedy Power does not Is the power cord properly y Plug the power cord securely into the power outlet. turned on. connected? y Unplug the power cord, wait several seconds, then plug the power cord back in. Power turns OFF without Auto Power Off is set.

  • Page 91: Appendix

    Appendix Chapter 10 Appendix Specifications General for BCS-727/BCS-323 Power requirements AC 110 V to 240 V, 50 Hz/60 Hz Power consumption 190 W (In Standby mode: Less than 0.5 W) Dimensions (W x H x D) Approx. 430 mm x 345 mm x 62 mm Net Weight (Approx.) 3.4 kg Operating temperature 5 °C to 35 °C...

  • Page 92

    Appendix Amplifier for BCS-727/BCS-323 Power output (RMS) THD 30 % Total 1100 W Front 150 W × 2 (4 Ω) Center 250 W (3 Ω) Rear 150 W × 2 (4 Ω) Sub-Woofer 250 W (3 Ω) Amplifier for BCS-HW929/BCS-HF828/BCS-SB626/BCS-FS525 Power output (RMS) THD 30 % Total 550 W Front 150 W × 2 (4 Ω) Sub-Woofer 250 W (3 Ω) System Laser Semiconductor laser Signal system...

  • Page 93

    Appendix Speakers for BCS-323 S-BD121 • Front/Surround speaker (Left/Right) Net Dimensions Type 1 Way 95 mm x 80 mm x 90 mm (W x H x D) Impedance Rated 4 Ω Net Weight 0.3 kg • Center speaker Net Dimensions Type 1 Way 230 mm x 80 mm x 90 mm (W x H x D) Impedance Rated 3 Ω...

  • Page 94

    Appendix Speakers for BCS-SB626 S-BD621FS • Front speaker Net Dimensions Type 1 Way 800 mm x 100 mm x 88 mm (W x H x D) Impedance Rated 4 Ω Net Weight 1.9 kg S-BD921SW • Subwoofer Net Dimensions Type 1 Way 130.5 mm x 420 mm x 375 mm (W x H x D) Impedance Rated 3 Ω...

  • Page 95: Maintenance

    Appendix Maintenance Notes on discs Handling discs Handling the unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints When shipping the unit do not get on the surface. Never stick paper or Please save the original shipping carton and tape on the disc.

  • Page 96: Important Information Relating To Network Services

    Content or Services should be made directly to the respective Content and Service Providers. Please note that PIONEER is not responsible for any Content or Services provided by the Service Provider or any changes to, removal of,...

  • Page 97

    [*] XV-BD421W, XV-BD121W, XV-BD921FSW, XV-BD821FSW, XV-BD621FSW, XV-BD521FSW English: Dansk: Hereby, Pioneer, declares that this [*] Undertegnede Pioneer erklærer herved, is in compliance with the essential at følgende udstyr [*] overholder de requirements and other relevant væsentlige krav og øvrige relevante provisions of Directive 1999/5/EC.

  • Page 98

    1999/5/EF. noteikumiem. Íslenska: Šiuo Pioneer deklaruoja, kad šis [*] Hér með lýsir Pioneer yfir því að [*] er í atitinka esminius reikalavimus ir kitas samræmi við grunnkröfur og aðrar 1999/5/EB Direktyvos nuostatas. kröfur, sem gerðar eru í tilskipun...

  • Page 100

    253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 K002_B3_En Printed in China / Imprimé...

Comments to this Manuals

Symbols: 0
Latest comments: