Preparing The Speakers - Pioneer LX03 Operating Instructions Manual

01 Speaker Setup Guide

Preparing the speakers

1 Attach the non-skid pads to the base of
each speaker (as shown).
Use the adhesive side of the pads to attach
them to the base (flat surface) of each speaker.
Front
speaker
Non-skid pads
(for subwoofer)
2 (When mounting center speakers to right
and left) Stack the speakers and fix with the
bracket.
Each speaker is provided with a color-coded
indicator on the label on the rear side to assist
identification. Refer to the color indicators and
install the speakers correctly.
8
En
Non-skid pads
(for satellite
speakers)
Center Surround
speaker speaker
Subwoofer
Color indicator
As shown in the illustration, stack the
speakers. Align the brackets with the screw
holes on the back of the two speakers, and use
the two screws to fix in place.
Standard surround setup:
Left
Front
White
speaker
Center
Green
speaker
Front
speaker
Center
speaker
Right
Red
Green
Bracket
Screw