Adjusting Sound Delay - Pioneer LX03 Operating Instructions Manual

Listening to your system
ENTER
3 Select the desired Bass Mode
setting, then press ENTER to confirm.
Select between Off, Music, Cinema or Auto.
• When Bass Mode is set to Auto, the
setting (Music or Cinema) is selected
automatically to optimally match the audio
signal.
• The BASS MODE indicator lights when
Bass Mode is active.

Adjusting sound delay

Some monitors have a slight delay when
showing video, so the soundtrack will be
slightly out of sync with the picture. By adding
a bit of delay, you can adjust the sound to
match the presentation of the video.
There are a total of 60 steps (levels) that you
can adjust, with a total range of 200 msec.
SOUND
1 Press to open the sound menu.
ENTER
2 Select 'Sound Delay' then press
ENTER.
ENTER
3 Select the length of the delay in
sound, then press ENTER to confirm.
• This option is deactivated and not
displayed if you have Auto Delay set to On
in HDMI Setup (see Setting the Auto Delay
on page 64).
05
31
En