Lfe Attenuate; Dts Cd Setting; Dual Mono Setting - Pioneer LX03 Operating Instructions Manual

Surround sound settings

LFE Attenuate

Some Dolby Digital and DTS audio sources
include ultra-low bass tones.
Set the LFE attenuator as necessary to prevent
the ultra-low bass tones from distorting the
sound from the speakers.
SETUP
ENTER
1 Open the 'Sound Setup'
menu.
ENTER
2 Select 'LFE ATT', then press
ENTER.
3 Select a setting.
Select one of the following:
• 0dB – The LFE is not limited, which is the
recommended value.
• -10dB – The LFE is limited by the respective
degree.
• LFE Off – No sound is output from the LFE
channel.
ENTER
4 Press to exit.
Note
1 When DVD function is selected, the displayed setting items are L, R and L+R (displayed on OSD).

DTS CD setting

If you play a DTS-encoded CD, you will need to
change this setting to hear the decoded signal.
SETUP
ENTER
1 Open the 'Sound Setup'
menu.
ENTER
2 Select 'CD Type', then press
ENTER.
3 Select a setting.
Select one of the following:
• Normal CD – Use for playback of regular
audio CDs. Some DTS-encoded CDs will
output noise when played.
• DTS-CD – Use for playback of DTS-
encoded CDs, but note that the beginning
of regular CD tracks may be skipped.
ENTER
4 Press to exit.

Dual mono setting

Specifies how dual mono encoded Dolby
Digital soundtracks should be played. This
setting can also be used to change the audio
channels for DVD-RW discs recorded in
bilingual audio, and external inputs with
bilingual audio (HDMI and optical/coaxial
digital inputs).
AUDIO
1 Press repeatedly to select a setting.
Select one of the following:
• CH1 Mono – Only channel 1 is played
• CH2 Mono – Only channel 2 is played
• CH1/CH2 – Both channels are played
through the front speakers
09
1
51
En