Using The Supplied Speaker Stands - Pioneer LX03 Operating Instructions Manual

Speaker Setup Guide
Front surround setup:
Left
Surround
Blue
speaker
Center
Green
speaker
Surround
speaker
Center
speaker
Caution
• Do not attempt to carry the speakers when
they are connected with the bracket. Doing
so may cause damage to the bracket or
worsen damage to the bracket and
speakers in the event they are dropped.
3 Connect the speaker system.
Refer to Connecting up on page 11 to connect
the speakers properly. After connecting
everything, place the speakers as shown in the
diagram above for optimal surround sound.
After placing the speakers, run the Auto
MCACC setup (page 22) to complete your
surround sound setup.
Right
Grey
Green
Bracket
Screw
Using the supplied speaker
stands
When setting up the front surround, the
supplied accessory speaker stand can be used.
Apply the non-skid pads (for speaker stand) to
the four corners of the speaker stand and set
the speakers on the stand.
Non-skid pads
(for speaker stands)
01
Speaker stand
9
En