Lenovo ThinkServer TS440 User Manual page 58

Notes:
• The default settings already are optimized for you. Use the default value for any item you are not familiar
with. Do not change the value of unfamiliar items to avoid unexpected problems. If you consider
changing the server configuration, proceed with extreme caution. Setting the configuration incorrectly
might cause unexpected results. If you cannot turn on the server because of incorrect BIOS settings,
use the Clear CMOS jumper to restore the BIOS settings to the factory default settings. See "System
board components" on page 37.
• If you have changed any hardware in the server, you might need to reflash the BIOS and the FRU/Sensor
Data Records (SDR).
The following menus are listed on the BIOS Setup Utility screen:
• Main: See "Main menu" on page 46.
• Devices: See "Devices menu" on page 46.
• Advanced: See "Advanced menu" on page 46.
• Power: See "Power menu" on page 47.
• Security: See "Security menu" on page 47.
• Startup: See "Startup menu" on page 48.
• Exit: "Exit menu" on page 48.
Main menu
After entering the Setup Utility program, you can see the Main menu, which lists basic information about the
BIOS, total memory size, and system date and time.
To set the system date and time on the Main menu, see "Setting the system date and time" on page 49.
Devices menu
You can view or change various devices settings on the Devices menu in the Setup Utility program. On each
submenu, press Enter to view the information or show selectable options and select a desired option by
using the up and down arrow keys. Some items are displayed on the menu only if the server supports the
corresponding features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
The Devices menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
• Serial Port Setup: View and set serial connector configuration parameters.
• USB Setup: View and set USB configuration parameters.
• ATA Drive Setup: View and set SATA hard disk drive configuration parameters.
• Video Setup: View and set the primary video adapter type.
• Audio Setup: Enable or disable the onboard audio controller.
• Network Setup: Enable or disable the onboard Ethernet controller and other network functions.
Advanced menu
You can view or change various server component settings on the Advanced menu in the Setup Utility
program. The Advanced menu contains various configuration submenus and items. On each submenu,
press Enter to show selectable options and select a desired option by using the up and down arrow
46
ThinkServer TS440 User Guide