Lenovo ThinkServer TS440 User Manual page 151

9. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
the notches 1 on it with the tabs
microprocessor straight down into the microprocessor socket.
Note: The small triangle
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
4
corner of the microprocessor socket.
Figure 93. Installing the microprocessor
10. Gently close the microprocessor retainer, press down the small handle, and then push the handle inward
to lock the retainer into position and secure the new microprocessor in the socket.
Figure 94. Securing the microprocessor in the socket
11. Reinstall the heat sink and fan assembly. See "Replacing the heat sink and fan assembly" on page 132.
12. If you are instructed to return the old microprocessor, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 141.
2 in the microprocessor socket. Then, carefully lower the new
3 on one corner of the new microprocessor is the microprocessor orientation
.
Chapter 6 Installing, removing, or replacing hardware
139