Lenovo ThinkServer TS440 User Manual page 30

Your server model might have one or two hot-swap redundant power supplies. Each hot-swap redundant
power supply has one power cord connector
supply, there might be one or two status LEDs on the power supply near the power cord connector. When
the LED is lit in green, it indicates that the hot-swap redundant power supply is working correctly. When the
LED is lit in amber, it indicates that the hot-swap redundant power supply is likely to fail or has failed.
Figure 6. Rear view of the server with hot-swap redundant power supplies
1 Power cord connectors
Used to connect the power cords.
2 Serial connector
Used to attach a device that uses a 9-pin serial connector.
3 VGA DB-15 connector
Used to attach a VGA-compatible video device, such as a VGA monitor.
4 USB 3.0 connectors (4)
5 USB 2.0 connectors (2)
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you have
more than eight USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
6
Expansion card area
Your server has four expansion slots on the system board for you to install appropriate Peripheral Component
Interconnect (PCI) cards or PCI Express cards. For detailed information, see "System board components"
on page 37.
18
ThinkServer TS440 User Guide
1 on the rear of the server. For each hot-swap redundant power