Operating the 4x1 HD Switcher w/ Audio Decoding
The HDCP Setup submenu provides the option to disable HDCP detection on the selected
input. Some sources (such as computers) will enable HDCP if an HDCP-compliant display
is detected. Each HDMI input can be set to ON (enable) or OFF (disable). Set the input to
ON to force the source device to ignore detection of an HDCP-compliant display.
NOTE: Forcing the source device to ignore the detection of an
HDCP-compliant display does not decrypt HDCP content.
From the home screen, press the Menu button.
1.
2.
Use the Volume ▲ or Volume ▼ buttons to navigate to the Misc Setup menu.
MAIN MENU
MISC SETUP
3.
Press the Mode / OK button.
Use the Volume ▲ or Volume ▼ buttons to select the HDCP Setup option.
4.
MISC SETUP
HDCP SETUP
5.
Press the Mode / OK button. The current setting for Input 1 (HD In 1) will be
displayed.
HDCP SETUP
INPUT-1
6.
Press the Mute ► or Input ◄ buttons to change to switch between ON or OFF.
HDCP SETUP
INPUT-1
HDCP Setup
Using the front-panel buttons
( ON
)
( OFF )
(continued on next page)
page | 41
Using the Menu System