Operating the 4x1 HD Switcher w/ Audio Decoding
Using the Menu System
The 4x1 HD Switcher w/ Audio Decoding comes with a built-in menu system which provides
control over additional audio features. The following examples demonstrate some of the
more common features of the 4x1 HD Switcher w/ Audio Decoding.
Speaker size is determined by the ability of a speaker to reproduce low frequencies.
When using a powered Subwoofer one should select speaker size to SMALL. If the Center,
Surrounds, or Subwoofer speakers are not connected, then turn these channels 'off'.
(audio from these channels will be re-directed to the front speakers).
IMPORTANT: If the FL/FR speakers are bi-amped, then the
Speaker Size must be set to LARGE.
1.
Press the Menu button. The front-panel display will change to display the Speaker
Size menu:
MAIN MENU
SPEAKER SIZE
2.
Press the Mode / OK button. The front-panel display will show the Front L / Front R
speaker size:
SPEAKER SIZE
FRONT L/R(LARGE)
3.
Press the Mute ► or Input ◄ button to select the speaker size.
SPEAKER SIZE
FRONT L/R(SMALL)
Use the Volume ▲ or Volume ▼ buttons to configure the Center, Surround L / R,
4.
and Subwoofer.
Setting the Speaker Size
Using the front-panel buttons
page | 18