Honeywell UDC3300 User Manual page 97

Contents
This function determines whether LSP1 or PV is used as the setpoint when
Hot Start
the program is initially changed from HOLD to RUN. The selections are:
Reset Program When enabled, this selection allows you to reset the program to the
beginning or rerun it from the keyboard.
to Beginning
5/00
DISABL = present LSP1 is default setpoint
ENABL = present PV value is used as beginning setpoint value for the
ramp segment
UDC3300 Expanded Model: DC330E User Manual
Setpoint Rate/Ramp/Soak Program Operation
Definition
87