Table of Contents
Advertisement
Chapter 6 Basic Setting
Table 16 ONU Setup (continued)
LABEL
MAC Address
EPON Profile
Classifier Filter
Profile
VLAN Profile
Priority Profile
4-Port ONU
Profile
Add
Cancel
Clear
Port
Active
ONU Name
MAC Address
EPON Profile
Classifier Filter
Profile
VLAN Profile
Priority Profile
4-Port ONU
Profile
Delete
Cancel
68
DESCRIPTION
Select the first radio button and manually enter the MAC address of the ONU to which
this service is to be applied.
Alternatively, click the ONU name "Deafult" of a PON port in the table below. The
MAC address of the ONU connected to the selected PON port displays automatically
in the drop-down list box of the second radio button. Select the second radio button
and the MAC address of the ONU to which this service is to be applied. To create a
new service profile, you need to enter a new name in the ONU Name field.
Select the EPON profile to apply to the ONU. You can configure EPON profiles in the
EPON Profile screen (refer to
Select the packet classification filter profile to apply to the ONU. Refer to
on page 79
for more information on classification filter profile setup.
Select the VLAN profile to apply to the ONU. You can configure VLAN profiles in the
VLAN Profile screen (refer to
Select the packet priority profile to apply to the ONU. Refer to
69
for more information on priority profile setup.
Select the 4-port ONU profile to apply to the 4-port ONU. Refer to
page 74
for more information on 4-port ONU profile setup.
Click Add to save the settings.
Click Cancel to reset the fields to your previous configuration.
Click Clear to reset the fields to the default settings.
This field displays the port index number.
This field displays whether the service is enabled or not.
This field displays the name of the ONU on this port. Click a name to configure the
ONU settings.
This field displays the MAC address of the ONU allowed to use the service on this
port. ff:ff:ff:ff:ff:ff:ff means that any ONU is allowed on the port.
This field displays the name of the EPON profile the ONU on this port uses. Click a
name to configure the EPON profile.
This field displays the name of the classifier filter profile the ONU on this port uses.
Click a name to configure the classifier filter profile.
This field displays the name of the VLAN profile the ONU on this port uses. Click a
name to configure the VLAN profile.
This field displays the name of the priority profile the ONU on this port uses. Click a
name to configure the priority profile.
This field displays the name of the 4-port ONU profile the ONU on this port uses. Click
a name to configure the 4-port ONU profile.
Click Delete to remove the selected entry from the summary table.
Note: You cannot delete the default services.
Click Cancel to clear the Delete check boxes.
Section 6.10 on page
69).
Section 8.4 on page
86).
Section 7.2
Section 6.10 on page
Section 6.12 on
OMC-2301 User's Guide
Advertisement
Table of Contents
Troubleshooting
